There’s more in this little drop than muscles.
A good dental adhesive is not measured by bond strength alone. In fact, many dentists consider low film thickness and viscosity as equally important. Prime&Bond elect Universal Dental Adhesive’s clinically proven PENTA (dipentaerythritol penta acrylate monophosphate) technology chases away water, enabling a strong bond with less sensitivity. It also features excellent bond strength and cures clear. It’s time to think beyond the bond.
All indications, all etching methods
Clinically proven PENTA technology
Excellent performance with Calibra Ceram Resin Cement
Cures Clear
Low Film Thickness
Clinically Proven PENTA Chemistry
Prime&Bond elect adhesive is built on the chemistry of one of the world’s most widely used and clinically tested adhesives. PENTA chemistry provides a unique micromechanical and chemical bond for long-term success. Not only does the chemistry use acetone to chase water from the prep, but unlike the MDP adhesive monomer which contains just one vinyl group, PENTA contains five vinyl groups (for locking into resin). Because of this structural advantage, adhesives with PENTA are better able to resist degradation of the bond.
Pair with Calibra Ceram Resin Cement
Put it all together with one-step curing. When Prime&Bond elect adhesive and Calibra Ceram Resin Cement are paired together, there’s no need for a separate activator.
Cures Clear
The clear color of Prime&Bond elect adhesive helps to ensure that the esthetic outcome of your restoration is not compromised.
Prime&Bond elect
Scotchbond™ Universal
Low Film Thickness
In direct restorations, thick adhesives can pool in the corners of the proximal box. These adhesive pools can show up as translucent areas on a radiograph, which can easily be mis-diagnosed as a void, gap, or secondary decay, leading to unnecessary replacement. Thicker adhesives may also change the crown prep geometry, impacting crown fit.
Prime&Bond elect adhesive provides a lower film thickness of resin-dentin and resin-enamel interfaces.
* Source: “Film thickness FE-SEM evalutation,”Andre F. Reis, DDS, MS, PhD
Prime&Bond elect
Scotchbond™ Universal
Excellent Bond Strength
Prime&Bond elect adhesive maintains impressive mechanical stability of the resin by limiting the amount of water absorbed by the adhesive. Too much water can degrade the bond over time, causing it to fail prematurely. Consistent bond strength across varied moisture levels is paramount for a durable bond.

Prime&Bond elect Universal Dental Adhesive Downloads
RES-PrimeBondelect-Brochure-EN 4 MB
Prime&Bond elect - Brochure - English
RES-PrimeBondelect-DFU-multilingual 617 kB
Prime & Bond Elect - Directions for Use - English, French, German, Italian, Spanish
Prime&Bond elect | Technique Guide | Dentsply Sirona 2 MB
Prime&Bond elect - Technique Guide
Prime&Bond elect - MSDS 122 kB
Material Safty Data Sheet
Prime&Bond elect | Extract Reality Report 647 kB
Description in the Reality Report 2017
Want to know more about our Restorative Products?
Submit your contact details and one of our restorative specialists will get in touch with you soon.